Great-plains 25P Eliminator Bushing Field Manual de usuario descargar pdf (Pagina 4)

4 Great Plains Manufacturing, Inc. Eliminator Bushing Update Kit

498-255M 11/15/2010

Reassemble to Guage Wheel Arm

Reassemble Bushing to Arm

Refer to Figure 5 and Figure 6

13. With bushing pack all together, make sure ﬂat

groove on outer bushing faces the back and

notch in inner bushing is to the outside of arm.

Slide pack into guage wheel arm .

14. Put hex-head bolt back through making sure it is

lined up with the ﬂat groove in bushing .

15. Finger tighten hex-head bolt .

16. Put hex adjuster in place.

Line up notch on hex adjuster nut with notch in

eccentric bushing .

17. Reusing pivot bolt tighten ﬁnger tight.

18. Make sure bushing notch is on the bottom, this is

your starting point.

Figure 5

Bushings and Guage Wheel Arm

31700

10 11

Figure 6

Inner and Outer Bushings

Disassembled (top), Joined (bottom)

31699

1 2 3 4 5 6

Sin comentarios

Great-plains 25P Eliminator Bushing Field Manual de usuario Pagina 4