Great-plains 20 Series DrillS Assembly Instructions Manual de usuario descargar pdf

Installation Instructions

Great Plains Mfg., Inc.

Used with:

•

Before You Start

Beginning on page 4 are detailed lists of parts included in the

marker packages. Use these lists to inventory parts received.

Assembly Instructions

Assembling Markers

Refer to Figure 1.

1. Lower drill into ﬁeld position. Allow 9 feet on each end of a

15-foot drill and 11 feet on each end of a 20-foot drill for

marker assembly.

2. Mount ﬁrst marker section (1) on drill 6-by-6-inch frame tube.

Mount plate so edge (2) is 3 1/2 inches (8.89 cm) from end of

drill frame. On 20-foot drills, also install marker mount sup-

port (3) onto marker mount as shown. Secure mount with

3/4-by-6-by-7 3/4-inch u-bolts (4), lock washers (5) and nuts

(6).

3. Remove port plugs on cylinder and carefully unfold ﬁrst

marker section. Rotate hinge section (7) into a horizontal

position.

4. Align holes of break-away section (8) with holes in hinge

section. Bolt sections together with stop block (9) on break-

away section facing up. Use 5/8-inch pivot bolt (10), lock nut

(11), 3/8-by-1 3/4-inch, grade 2 shear bolt (12) and lock nut

(13).

IMPORTANT: Be sure shear bolt is a grade 2 bolt. Failure

to use a grade 2 bolt can cause marker damage.

5. Repeat steps for other marker.

6. Adjust marker disks so they are square with ground when

markers are lowered in ﬁeld position. Refer to Marker Ad-

justments, "Adjustments," in operator’s manual.

113-477M

12, 15 and 20 Series Drills

Folding Markers

1200, 1210 and 1220

1500, 1510 and 1520

2000, 2010 and 2020

General Information

These instructions explain how to install the markers. The mark-

ers fold and unfold hydraulically for ﬁeld operation. The marker

disks leave a line for the drill operator to follow on the next ﬁeld

pass. Markers are mounted on the drill frame.

These instructions apply to:

113-490A 15-FOOT DUAL FF NO-TILL MKR W/SEQ

113-491A 20-FOOT DUAL FF NO-TILL MKR W/SEQ

113-457A 20-FOOT DUAL NO-TILL HYD FF MKR-94

Manual Update

Refer to the drill operator’s manual for detailed information on

safely operating, adjusting, troubleshooting and maintaining the

markers. Refer to the parts manual for part identiﬁcation.

• 12, 15 and 20 Series Drill Operator’s Manual . .118-389M-A

• 12, 15 and 20 Series Drill Parts Manual. . . . . . . . .118-389P

Figure 1

Marker Assembly

12238

When you see this symbol, the subsequent instructions and

warnings are serious - follow without exception. Your life and

the lives of others depend on it!

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - General Information

Pagina 2 - Installing Marker Hydraulics

212, 15 and 20 Series Drills Folding Markers 113-477M 4/9/04Great Plains Mfg., Inc.Assembly Assembling Transport ArmFor 20-foot drills, assemble tra

Pagina 3 - WARNING!

34/9/0412, 15 and 20 Series Drills Folding Markers 113-477MGreat Plains Mfg., Inc. Assembly Bleeding Marker Hydraulics!CAUTION!You may be injured if

Pagina 4 - Listing of Parts

Great Plains Mfg., Inc.Listing of Parts12, 15 and 20 Series Drills Folding Markers 113-477M 4/9/044Qty. Part No. Part Description 113-490A 15-Foot D

Pagina 5 - 113-457A 20-Foot Dual Markers

Great Plains Mfg., Inc. 4/9/0412, 15 and 20 Series Drills Folding Markers 113-477MListing of Parts5Qty. Part No. Part Description 2 113-203H SUPPORT

Pagina 6

Great Plains Mfg., Inc.Listing of Parts12, 15 and 20 Series Drills Folding Markers 113-477M 4/9/046Qty. Part No. Part Description 1 113-477M MANUAL

Comentarios a estos manuales

Sin comentarios

Great-plains 20 Series DrillS Assembly Instructions Manual de usuario

Busca en linea o descarga Manual de usuario para Máquinas De Jardín Great-plains 20 Series DrillS Assembly Instructions. Great Plains 20 Series DrillS Assembly Instructions User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas De Jardín Great-plains 20 Series DrillS Assembly Instructions